Writing this from a passively cooled (Streacom FC8 Evo) Linux PC with a Russian keyboard.
# dmidecode 3.6
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x002C, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0029
Type: <OUT OF SPEC>
Status: <OUT OF SPEC>
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1
Handle 0x002F, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0029
Type: <OUT OF SPEC>
Status: <OUT OF SPEC>
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Not Specified
Handle 0x0037, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0036
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1
I normally think PC cases are gaudy and boring even when trying to evoke some style. That stuff in Streacom website however makes me want to build something with it.
I am not sure what an "industrial PC" means. Inside, there are heat pipes connected to the CPU, and one side of the case (where these heat pipes lead) serves as both a heatsink and a surface with fins for convective cooling.
Industrial PCs are computers meant to go in industrial environments. They vary quite a bit but often have to handle dirty (possibly explosive or corrosive) air, 24v power, wide temperature ranges, lots of electrical and radio noise, and being cabinet mounted.
If you've got a little Node-RED box reading serial data from your bar code reader, doing lookups in your SAP database, and then sending Modbus commands to your PLC to redirect a box down a different conveyor line, it's probably an industrial PC.
Streacom makes fanless and air-cooled cases computers that aim to look good. Their products target an audio/video and enthusiastic pc building market. I would say they would be on the same category as Silverstone.
Yeah, that sounds quite different than industrial PCs, where the engineer specifying it spends 10 minutes pouring over specs and 2 seconds looking at the picture.
Sensor data: