Location: New York
Remote: Yes
Willing to relocate: No
Technologies: Python, TypeScript/Javascript, Rust, Linux
Resume: https://skyler.io/resume.pdf
Email: skyler at skyler dot io
If so, then finding the redacted string would be similar to trying to brute-force a hash (though presumably slower, since text layout algorithms are probably more complex than a single hash invocation).
Location: New York
Remote: Yes
Willing to relocate: No
Technologies: Python, TypeScript/Javascript, Rust, Linux
Resume: https://skyler.io/resume.pdf
Email: skyler at skyler dot io
It would be nice if this told you upfront how many questions there were - after sixteen with nothing changing I figured it was probably endless but apparently there are twenty?
The only reason I use Wayland is display scaling - with a high DPI screen, many apps are blurry or inconsistently scaled under X11. Given the parade of other issues Wayland brings, I wish the development effort were instead spent on improving highDPI support in X11.
O man I recently tried to use fractional scaling on Wayland, and it went very poorly. Electron apps like slack or signal do not support it, and flameshot also works very poorly. But I guess at least fractional scaling is to an option... (Which I had to enable in some secret setting somewhere)
Gravity changes little over that distance - it's more because of the compounding effect of atmospheric pressure (the deeper you go, the more air you have above you which raises the pressure, raising the density and meaning that pressure increases exponentially faster).
Starting at an initial density of air, suppose you descend a distance D such that the air density doubles. Now your air is twice as dense, which doubles the pressure underneath it, meaning if you descend a further D the density will double again. Continue ad infinitum (or at least until the ideal gas law stops being a good approximation).
> Pressure (P), mass (m), and acceleration due to gravity (g) are related by P = F/A = (m*g)/A, where A is the surface area. Atmospheric pressure is thus proportional to the weight per unit area of the atmospheric mass above that location.
An interesting corollary of this is that if you only have a single sample, it reduces to indicating that your sample is the median value - i.e. if you see one item with serial number N, you can guess that there were roughly 2N produced.
My understanding is that coal/nuclear/gas plants provide a certain amount of stability thanks to the rotational inertia in the turbines. It seems like a relatively inexpensive way to retain that capacity would be to keep the old turbines to function essentially as flywheels, to stabilize the grid, after the plants powering them are shut down.
It sounds like a pitch that you might hear from an airplane propeller, which leads to the question why airsickness exists if the antidote is ambiently present?
Strength very rarely matters in knife blades, unless you use knives as pry bars (strength determines the force required to either break the blade or cause a permanent plastic deformation of the blade, i.e. to permanently bend the blade).
What matters is the compromise between hardness (good for edge retention) and toughness (required to avoid chipping).
Many alloyed steels (especially with chromium and vanadium) allow a better compromise than simple carbon steels, i.e. either a higher toughness at equal hardness or a higher hardness at equal toughness.
When you do not specify simultaneously hardness and toughness, simple carbon steels may seem good enough, because they can be made to be either very hard or very tough.
If you cut only very soft things, like fish meat without bones, a very hard carbon steel blade (like a traditional Japanese yanagiba) will not have any disadvantage versus an alloyed steel blade. When you want a more versatile knife, an alloyed steel blade will be superior.
